Ethernet-Service Uni-Profile - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

VLAN Stacking Commands

ethernet-service uni-profile

Creates a User Network Interface (UNI) profile that is used to specify how to process control packets
ingressing on UNI ports.
ethernet-service uni-profile uni-profile-name [l2-protocol {stp | 802.1x | 802.1ab | 802.3ad | mvrp |
amap} {peer | discard | tunnel}
no ethernet-service uni-profile uni-profile-name
Syntax Definitions
uni-profile-name
stp
802.1x
802.1ab
802.3ad
mvrp
amap
peer
discard
tunnel
Defaults
parameter
stp
mvrp
amap
802.1x
802.3ad
802.1ab
Platforms Supported
OmniSwitch 10K
OmniSwitch CLI Reference Guide
Alphanumeric string. Use quotes around string if the profile name
contains multiple words with spaces between them (for example,
"Alcatel-Lucent Engineering").
Specifies how Spanning Tree BPDU is processed on the UNI port.
Specifies how 802.1x control frames are processed on the UNI port.
Specifies how 802.1ab control frames are processed on the UNI port.
Specifies how 802.3ad and 802.3ah control frames are processed on the
UNI port.
Specifies how Multicast VLAN Registration Protocol packets are
processed on the UNI port.
Specifies how Alcatel Management Adjacency Protocol packets must be
processed on the UNI port.
Allows the UNI port to participate in the specified protocol.
Discards the specified PDU.
Tunnels the specified PDU across the provider network.
default
tunnel
tunnel
discard
discard
peer
discard
March 2011
ethernet-service uni-profile
page 34-23