Ethernet-Service Uni-Profile - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ethernet-service uni-profile

Creates a User Network Interface (UNI) profile that is used to specify how to process control packets
ingressing on UNI ports.
ethernet-service uni-profile uni-profile-name [l2-protocol {stp | 802.1x | 802.1ab | 802.3ad | gvrp |
amap} {peer | discard | tunnel}
no ethernet-service uni-profile uni-profile-name
Syntax Definitions
uni-profile-name
stp
802.1x
802.1ab
802.3ad
gvrp
amap
peer
discard
tunnel
Defaults
parameter
stp
802.1x
802.3ad
802.1ab
gvrp
amap
Platforms Supported
OmniSwitch 6250-Metro Models
page 24-24
Alphanumeric string of up to 32 characters. Use quotes around string if
the profile name contains multiple words with spaces between them
(e.g., "Alcatel-Lucent Engineering").
Specifies how Spanning Tree BPDU will be processed on the UNI port.
Specifies how 802.1x control frames will be processed on the UNI port.
Specifies how 802.1ab control frames will be processed on the UNI
port.
Specifies how 802.3ad and 802.3ah control frames will be processed on
the UNI port.
Specifies how GARP VLAN Registration Protocol packets will be
processed on the UNI port.
Specifies how Alcatel Management Adjacency Protocol packets will be
processed on the UNI port.
Allows the UNI port to participate in the specified protocol.
Discards the specified PDU.
Tunnels the specified PDU across the provider network.
default
tunnel
discard
peer
discard
tunnel
discard
VLAN Stacking Commands
OmniSwitch CLI Reference Guide November 2009