ethernet-service service-name
ethernet-service service-name
Creates a VLAN Stacking service and associates the service with an SVLAN. A service can be carried
only on a single SVLAN. All traffic within the associated service is carried on the SVLAN.
ethernet-service service-name service-name svlan svlan_id
no ethernet-service service-name service-name svlan svlan_id
Syntax Definitions
service-name
svlan_id
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a VLAN Stacking service. Note that when a service is
removed, the SVLAN association with that service is also removed.
•
If the VLAN Stacking service is associated with a Service Access Point (SAP), then remove the SAP
associations before attempting to remove the VLAN Stacking service.
•
Each VLAN Stacking service is associated with one SVLAN. Specifying an additional VLAN ID for
an existing service is not allowed.
Examples
-> ethernet-service service-name Marketing svlan 10
-> no ethernet-service service-name Marketing svlan 10
Release History
Release 7.1.1; command introduced.
page 34-6
The name of the VLAN Stacking service; an alphanumeric string. Use
quotes around string if the service name contains multiple words with
spaces between them (for example, "Alcatel-Lucent Engineering").
The VLAN ID number that identifies an existing SVLAN to associate
with the VLAN Stacking service.
VLAN Stacking Commands
OmniSwitch CLI Reference Guide
March 2011