Table of Contents
Advertisement
Field
Link
Protocol
Main IP
Description
Cause
display mfr
Syntax
display mfr [ interface interface-type interface-number | verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.
verbose: Displays detailed statistics, including the number of controlling packets sent and received.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display mfr command to display configuration and statistics of the specified multilink frame relay
bundle and bundle link.
If neither interface nor verbose is specified, this command displays the brief information of all main
interfaces.
Description
Physical link state of the interface, which can be:
•
UP—The link is up.
•
ADM—The link has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
Protocol connection state of the interface, which can
be UP, DOWN, or UP(s).
The main IP address of the interface.
Description of the interface.
The cause of a DOWN physical link. If the port has
been shut down with the shutdown command, this
field displays Administratively. To restore the physical
state of the interface, use the undo shutdown
command.
85
Advertisement
Table of Contents
