Qos Apply Policy; Qos Policy - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – QinQ-BPDU Tunneling

H3C S7500E Series Ethernet Switches

1.1.7 qos apply policy

qos apply policy policy-name inbound

undo qos apply policy inbound

Ethernet port view, port group view

inbound: Applies the specified policy to the traffic received on the current port(s).

policy-name: Policy name, a string of 1 to 31 characters.

Use the qos apply policy command to apply a policy on a port or a port group.

Use the undo qos apply policy command to remove the policy applied on a port or a

In selective QinQ implementation on SC/SA/EA series boards, a QoS policy can be

applied only to incoming traffic. Therefore, the qos apply policy command can be

applied only on ports receiving traffic from the customer network.

SC boards include LSQ1GP24SC boards, SA boards include LSQ1FP48SA boards,

and EA boards include only LSQ1GP12EA boards. For complete information about

board types, refer to the accompanied installation manual.

# Apply the policy test in the inbound direction of Ethernet 2/0/1.

<Sysname> system-view

[Sysname] interface Ethernet 2/0/1

[Sysname-Ethernet2/0/1] qos apply policy test inbound

qos policy policy-name

undo qos policy policy-name

Chapter 1 QinQ Configuration Commands

Table of Contents