unit-id: Unit ID, which is fixed to 1. With this argument specified, the traffic redirecting configuration of all
the ports on the device is displayed.
Description
Use the display qos-interface traffic-redirect command to display the traffic redirecting configuration
of a port or all the ports on the device.
Related command: traffic-redirect.
Only H3C S3100-EI series switches support this command.
Example
# Display the traffic redirecting configuration of Ethernet 1/0/1 (assuming that the current device is an
S3100-EI series switch).
<Sysname> display qos-interface Ethernet 1/0/1 traffic-redirect
Ethernet1/0/1: traffic-redirect
Inbound:
Matches: Acl 2000 rule 0
Redirected to: interface Ethernet1/0/2
Table 1-5 Description on the fields of the display qos-interface traffic-redirect command
Field
Ethernet1/0/1
Inbound
Matches
Redirected to
display qos-interface traffic-remark-vlanid
Syntax
display qos-interface { interface-type interface-number | unit-id } traffic-remark-vlanid
View
Any view
Parameters
interface-type interface-number: Specifies a port by its type and number.
unit-id: Unit ID, which is fixed to 1.
running
Port with traffic redirecting configured
Packet direction
ACL rules for traffic classification
"interface" indicates that the packets are redirected to the port.
"cpu" indicates that the packets are redirected to the CPU.
1-11
Description