Tunnel Name; Tunnel Password - H3C MSR810 Command Reference Manual

tunnel name

Use tunnel name to specify the local tunnel name.
Use undo tunnel name to restore the default.
Syntax
tunnel name name
undo tunnel name
Default
The local tunnel name is the device name. For more information about the device name,
see Fundamentals Configuration Guide.
Views
L2TP group view
Predefined user roles
network-admin
Parameters
name: Specifies the local tunnel name, a case-sensitive string of 1 to 31 characters.
Examples
# Specify the local tunnel name as itsme.
<Sysname> system-view
[Sysname] l2tp-group 1 mode lns
[Sysname-l2tp1] tunnel name itsme
Related commands
sysname (Fundamentals Command Reference)

tunnel password

Use tunnel password to configure the key for tunnel authentication.
Use undo tunnel password to restore the default.
Syntax
tunnel password { cipher | simple } string
undo tunnel password
Default
No key is configured for tunnel authentication.
Views
L2TP group view
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
129