Ppp Chap Password - H3C SR8800 Command Reference Manual

NOTE:
For more information about creating a local user account, configuring its attributes, creating a domain,
and configuring domain attributes, see
Related commands: ppp chap user, ppp pap local-user, and ppp chap password; local-user and
domain default enable (Security Command Reference)
Examples
# Configure to authenticate the peer router using PAP on interface Serial 4/1/9/1:0.
<Sysname> system-view
[Sysname] interface Serial 4/1/9/1:0
[Sysname-Serial4/1/9/1:0] ppp authentication-mode pap domain system

ppp chap password

Syntax
ppp chap password { cipher | simple } password
undo ppp chap password
View
Synchronous serial interface view
Default level
2: System level
Parameters
cipher: Specifies to display the password in cipher text.
simple: Specifies to display the password in plain text.
password: Default password for CHAP authentication, a string of 1 to 48 characters. When the simple
keyword is used, this password is in plain text. When the cipher keyword is used, this password can
either be in cipher text or in plain text. A password in plain text is a string of no more than 48 characters,
such as aabbcc. A password in cipher text has a fixed length of 24 or 64 characters, such as
_(TT8F]Y\5SQ=^Q`MAF4<1!!.
Description
Use the ppp chap password command to set the default password for CHAP authentication.
Use the undo ppp chap password command to cancel the configuration.
Related commands: ppp authentication-mode chap.
Examples
# Set the default password for CHAP authentication to Sysname, which is to be displayed in plain text.
<Sysname> system-view
[Sysname] interface Serial 4/1/9/1:0
[Sysname-Serial4/1/9/1:0] ppp chap password simple sysname
Security Configuration Guide.
31