Password (Ftp Operation View) - H3C SR6600 Command Reference Manual

Syntax
operation interface interface-type interface-number
undo operation interface
Default
No interface is specified to perform the DHCP operation.
Views
DHCP operation view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
The specified interface simulates the DHCP client to acquire an IP address and it does not change its IP
address. When the DHCP operation completes, the NQA client sends a packet to release the obtained
IP address.
Examples
# Specify the interface GigabitEthernet 2/0/1 to perform the DHCP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] operation interface gigabitethernet 2/0/1

password (FTP operation view)

Use password to configure a password used to log in to the FTP server.
Use undo password to remove the configured password.
Syntax
password [ cipher | simple ] password
undo password
Default
No password is configured for logging in to the FTP server.
Views
FTP operation view
Default command level
2: System level
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
40