Display Qos-Profile - H3C s3100 series Command Manual

System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] apply qos-profile a123
# Apply the QoS profile named a123 to Ethernet 1/0/1 through Ethernet 1/0/4.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] apply qos-profile a123 interface Ethernet 1/0/1 to Ethernet 1/0/4

display qos-profile

Syntax
display qos-profile { all | name profile-name | interface interface-type interface-number | user
user-name }
View
Any view
Parameter
all: Specifies all the QoS profiles.
name profile-name: Specifies a QoS profile by its name, for which information is to be displayed. The
profile-name argument is a case-insensitive string of 1 to 32 characters and must begin with an English
letter (a to z, and A to Z).
interface interface-type interface-number: Specifies the type and number of a port to display the QoS
profile applied on the port.
user user-name: Specifies the name of an 802.1x authentication user. The user-name argument is a
string of 1 to 184 characters and in the form of aa@cc, with aa for user name and cc for domain name.
Description
Use the display qos-profile command to display the configuration of a QoS profile or all the QoS
profiles.
Example
# Display the configuration of the QoS profile named test.
<Sysname> display qos-profile name test
qos-profile: test, 3 actions
packet-filter inbound ip-group 2000 rule 0
traffic-limit inbound ip-group 3000 rule 0 64
traffic-priority inbound ip-group 4000 rule 0 cos controlled-load
# Display the configuration of the QoS profile applied to the 802.1x user abc@net.
<Sysname> display qos-profile user abc@net
User abc@net applied qos-profile: test, 3 actions
packet-filter inbound ip-group 2000 rule 0
traffic-limit inbound ip-group 3000 rule 0 64
traffic-priority inbound ip-group 4000 rule 0 cos controlled-load
2-2