Renault Laguna III Manual page 1484

Thermostat: Removal - Refitting
V4Y
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the clip (2) from the cooling hose using the
tool (Mot. 1448).
a Disconnect the cooling hose.
a Remove:
- the bolts (3) from the thermostat,
- the thermostat,
- the thermostat seal.
COOLING
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: thermostat seal (10,
06,03,03).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- a new thermostat seal,
- the thermostat.
a Torque tighten the thermostat bolts (10 N.m).
a Connect the cooling hose.
a Fit the cooling hose clip using the tool (Mot. 1448).
III - FINAL OPERATION
a Connect the connector of the front row camshaft
dephaser solenoid valve.
134535 a Refit:
- the alternator accessories belt (see 11A, Top and
- the front right-hand wheel arch liner (see Front
- the front right-hand wheel (see Wheel: Removal -
a Fill and bleed the cooling system (see 19A, Cool-
ing, Cooling system: Draining - Refilling, page
19A-16) .
a Refit:
- the engine undertray,
- the engine cover.
133840
19A-96
front of engine, Accessories belt: Removal -
Refitting, page 11A-13) ,
wheel arch liner: Removal - Refitting) (55A, Ex-
terior protection),
Refitting) (35A, Wheels and tyres).
19A