Renault Laguna III Manual page 1313

M4R
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the starter bolts (6) ,
- the starter.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the starter,
- the starter bolts.
a Torque tighten the starter bolts (62 N.m).
II - FINAL OPERATION.
a Fit the starter wiring harness.
a Tighten to torque:
- the nut on the starter excitation connector (5
Nm),
- the nut on the starter power supply connector
(9 Nm).
a Fit the wiring bracket to the gearbox.
a Refit the wiring bracket bolt to the gearbox.
a Tighten the wiring bracket bolt on the gearbox.
STARTING - CHARGING
Starter: Removal - Refitting
123451
a Connect:
- the oil level sensor connector,
- the oil pressure sensor connector.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
a Refit the engine cover.
16A-36
16A