Renault Laguna III Manual page 1841

Lower engine tie-bar: Removal - Refitting
V9X
REFITTING THE LOWER ENGINE TIE-BAR
ON THE GEARBOX SIDE
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the lower engine tie-bar mounting on the gear-
box side.
a Pretighten in order the bolts of the lower engine tie-
bar mounting on the gearbox side.
a Torque tighten in order the bolts of the lower en-
gine tie-bar mounting on the gearbox side (62
N.m).
a Refit the lower engine tie-bar on the gearbox side.
a Torque tighten the bolts of the lower engine tie-
bar on the gearbox side (105 N.m).
II - FINAL OPERATION
a Refit the engine undertray.
REMOVING THE LOWER ENGINE TIE-BAR
ON THE TIMING END
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the engine undertray bolts,
- the engine undertray.
ENGINE MOUNTING
137046
19D-95
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the bolts (1) of the lower engine tie-bar on the gear-
box side,
- the lower engine tie-bar on the gearbox side,
- the bolts (2) from the lower engine tie-bar on the
timing end,
- the lower engine tie-bar on the timing end.
19D
133896