Starting - Charging; Alternator: Removal - Refitting - Renault Laguna III Manual

Alternator: Removal - Refitting
M4R
Tightening torquesm
alternator bolts
alternator nut
IMPORTANT
Wear latex gloves during the operation.
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove:
- the engine cover,
- the front right-hand wheel (see Wheel: Removal -
Refitting) (MR 415, 35A, Wheels and tyres),
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 415,
55A, Exterior protection),
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) .

STARTING - CHARGING

25 Nm
21 N.m
a Unclip the fuel supply pipe (1) on the expansion bot-
tle and on the engine mounting cover.
a Disconnect the fuel supply pipe (2) from the injector
rail.
a Fit blanking plugs on the fuel supply pipe.
a Remove the bolts (3) from the expansion bottle.
16A-1
16A
123403
123402