Renault Laguna III Manual page 1270

Exhaust gas recirculation rigid pipe: Removal - Refitting
K9K, and 780
Tightening torquesm
bolts of the exhaust gas
recirculation rigid pipe
on the exhaust manifold
new clip of the exhaust
gas recirculation rigid
pipe
bolts of the exhaust gas
recirculation rigid pipe
on the exhaust gas
cooler
bolts of the exhaust gas
recirculation rigid pipe
on the exhaust manifold
bolts of the exhaust gas
recirculation rigid pipe
bracket
IMPORTANT
Wear protective gloves during the operation.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove the front engine cover.
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove:
- the engine undertray bolts,
- the engine undertray,
- the catalytic converter (see 19B, Exhaust, Cata-
lytic converter: Removal - Refitting, page 19B-
32) .
ANTIPOLLUTION
36 N.m
5 N.m
12 N.m
36 N.m
25 N.m
14A-69
II - OPERATION FOR REMOVAL OF PART
CONCERNED
1 - First type of fitting of the exhaust gas
recirculation assembly
a Remove:
- the clip (1) of the exhaust gas recirculation rigid
pipe,
- the bolts (2) from the EGR rigid pipe,
- the exhaust gas recirculation rigid pipe,
- the seal between the exhaust gas recirculation rigid
pipe and the exhaust manifold,
- the exhaust gas recirculation rigid pipe clip.
14A
123837