Renault Laguna III Manual page 1321

K4M
REFITTING
I - REFITTING PREPARATION OPERATION
a Check that the centring dowelis in place.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the starter.
a Torque tighten the starter bolts (44 Nm).
a Fit the starter wiring harness.
a Tighten to torque:
- the starter supply cable nut (8 N.m),
- the starter excitation cable nut (5 N.m).
III - FINAL OPERATION.
a Connect:
- the oil level sensor connector,
- the battery (see Battery: Removal - Refitting)
(80A, Battery).
STARTING - CHARGING
Starter: Removal - Refitting
16A-44
16A