Renault Laguna III Manual page 1514

Engine cooling fan assembly: Removal - Refitting
K4M or M4R
a Unclip the engine cooling fan assembly wiring (6) .
a Move aside the engine cooling fan assembly wiring.
a Unclip the cooling radiator top and bottom hose (7)
from the engine cooling fan assembly.
a Unclip the engine cooling fan assembly from the ra-
diator at (8) by pushing it upwards to detach the
brackets holding it.
a Remove the engine cooling fan assembly down-
wards.
COOLING
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Fit the engine cooling fan assembly:
a Clip the engine cooling fan assembly to the cooling
radiator.
a Fit the engine cooling fan assembly wiring.
a Clip the engine cooling fan assembly wiring.
a Connect:
- the engine cooling fan assembly connector,
- the engine cooling fan assembly resistor connec-
a Clip the cooling radiator top and bottom hose on the
engine cooling fan assembly.
123468 II - FINAL OPERATION.
a Connect the pressure sensor connector.
a Refit:
- the engine undertray,
- the cooling assembly protector,
- the battery tray (see Battery tray: Removal - Re-
- the battery (see Battery: Removal - Refitting)
- the engine cover.
123471
19A-126
tor.
fitting) (80A, Battery),
(80A, Battery)
19A