Renault Laguna III Manual page 1832

Lower engine tie-bar: Removal - Refitting
F4R
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the engine tie-bar support,
- the engine tie-bar mounting bolts on the cylinder
block.
a Torque tighten the engine tie-bar mounting bolts
on the cylinder block (62 Nm).
a Refit:
- the rear suspended engine mounting rubber pad,
- the rear suspended engine mounting rubber pad
bolts on the subframe.
a Tighten the rear suspended engine mounting rubber
pad bolts on the subframe.
a Refit:
- the engine tie-bar,
- the engine tie-bar bolt from the subframe,
- the engine tie-bar bolt on the engine tie-bar mount-
ing.
a Tighten to torque:
- the engine tie-bar bolt on the subframe (115
Nm),
- the engine tie-bar bolt on the cylinder block
mounting (190 Nm).
II - FINAL OPERATION.
a Refit:
- the engine undertray,
- the engine undertray bolts.
a Tighten the engine undertray bolts.
ENGINE MOUNTING
19D-86
19D