Renault Laguna III Manual page 1388

Injector rail - Injectors: Removal - Refitting
V4Y
- the injector rail.
a Pull the injector clip (4) upwards.
a Remove:
- the injector clips,
- the injectors (5) .
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: injector seal (11,11,
02,02).
a parts always to be replaced: injector clip on in-
jector rail (11,04,04,10).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- new seals on the injectors,
- the injectors,
- new injector clips on the injector rail,
- the injector rail.
PETROL INJECTION
22916
17B-50
a Pre-tighten to torque and in order the injector rail
bolts (initial torque) (10 N.m).
a Tighten to torque and in order the injector rail bolts
(torque) (22 N.m).
III - FINAL OPERATION
a Clip the injector wiring on the front row.
a Remove the blanking plugs.
a Connect:
- the injector connectors,
- the petrol inlet union.
a Refit:
- the inlet manifold (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) ,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
17B
116732