Renault Laguna III Manual page 1256

Exhaust gas recirculation assembly: Removal - Refitting
K9K, and 780
a Refit:
- the exhaust gas intercooler cooling system cover
hose clips using the (Mot. 1448),
- the new exhaust gas recirculation rigid pipe (see
14A, Antipollution, Exhaust gas recirculation
rigid pipe: Removal - Refitting, page 14A-62) ,
- the catalytic converter (see 19B, Exhaust, Cata-
lytic converter: Removal - Refitting, page 19B-
32) ,
- the engine undertray,
- the engine undertray bolts,
- the air inlet metal tube,
- the timing end lifting eye,
- the « timing end lifting eye - air inlet metal tube »
assembly bolts.
a Tighten the « timing end lifting eye - air inlet metal
tube » assembly bolts.
a Refit the rail protector bracket bolts.
a Tighten the rail protector bracket bolts.
a Refit the damper valve (see 12A, Fuel mixture,
Damper valve: Removal - Refitting, page 12A-39)
.
a Connect the exhaust gas recirculation solenoid
valve connector.
a Fit:
- the intercooler air inlet pipe,
- the intercooler inlet air pipe clip in its original posi-
tion.
a Clip the intercooler air inlet pipe to the turbocharger.
a Refit:
- the nut to the intercooler inlet air pipe,
- the intercooler air inlet hose bolt.
a Tighten:
- the nut to the intercooler inlet air pipe,
- the intercooler air inlet hose bolt.
a Refit the oil vapour rebreathing pipe.
a Connect the oil vapour rebreathing pipe:
- to the oil vapour rebreathing valve,
- on the air filter box outlet air pipe.
a Refit the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
ANTIPOLLUTION
14A-55
a Bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) .
14A