Renault Laguna III Manual page 1774

Left-hand suspended engine mounting: Removal - Refitting
K4M
a Unclip the clutch pipe (7) from the suspended en-
gine mounting rubber pad shaft on the gearbox.
a Move the clutch pipe away from the suspended en-
gine mounting rubber pad shaft on the gearbox.
a Remove the bolts (8) from the power-assisted steer-
ing pump high pressure pipe.
a Move the power-assisted steering pump high pres-
sure pipe away from the suspended engine mount-
ing rubber pad shaft on the gearbox.
ENGINE MOUNTING
131083
19D-28
a Remove:
- the bolts (9) from the suspended engine mounting
rubber pad shaft on the gearbox,
- the suspended engine mounting rubber pad shaft
from the gearbox.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the suspended engine mounting rubber pad
shaft on the gearbox.
a Torque tighten the bolts from the suspended en-
gine mounting rubber pad shaft on the gearbox
(62 Nm).
a Fit the clutch pipe.
a Clip the clutch pipe on the suspended engine mount-
ing rubber pad shaft on the gearbox.
a Refit:
- the power-assisted steering pump high pressure
pipe on the suspended engine mounting rubber
pad shaft on the gearbox,
- the rubber pad mounting from the suspended en-
gine mounting on the gearbox.
a Torque tighten the rubber pad mounting bolts for
the suspended engine mounting on the gearbox
(62 Nm).
a Fit the wiring channel.
19D
131084