Renault Laguna III Manual page 1857

Pressure plate - Disc: Removal - Refitting
PK4
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the friction plate (with the small diameter of the
hub at the flywheel end (6) ).
a Centre the clutch plate using the (Emb. 1780) (7) .
a Refit the clutch pressure plate on the flywheel.
a Torque tighten the clutch pressure plate bolts (12
N.m).
a Remove the (Emb. 1780).
a Remove the (Mot. 1431).
CLUTCH
III - FINAL OPERATION.
a Refit:
- the gearbox (see 21A, Manual gearbox, Manual
gearbox: Removal - Refitting, page 21A-14) ,
- the front axle subframe (see Front axle subframe:
Removal - Refitting) (MR 415, 31A, Front axle
components),
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting)
(MR 416, 41A, Front lower structure),
- the front right-hand driveshaft (see 29A, Drive-
shafts, Front right-hand driveshaft: Removal -
Refitting, page 29A-7) ,
- the front left-hand driveshaft (see 29A, Drive-
shafts, Front left-hand driveshaft: Removal -
Refitting, page 29A-1) ,
a Fill the gearbox and check the level (see 21A, Man-
ual gearbox, Manual gearbox oils: Draining - Fill-
ing, page 21A-2)
a Refit:
102695
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (MR 416, 55A, Exterior
protection),
- the front wheels (see Wheel: Removal - Refitting)
(MR 415, 35A, Wheels and tyres),
- the air filter box (see Air filter unit: Removal - Re-
fitting) (MR 415, 12A, Fuel mixture),
- the battery tray (see Battery tray: Removal - Re-
fitting) (MR 415, 80A, Battery),
- the battery (see Battery: Removal - Refitting)
(MR 415, 80A, Battery).
114916
20A-10
20A