Renault Laguna III Manual page 1027

High pressure pump: Removal - Refitting
K9K, and 782
a Disconnect the union (9) of the exhaust fuel injector
solenoid valve supply pipe on the high pressure
pump.
a Fit a suitable blanking plug on the opening of:
- the union of the exhaust fuel injector solenoid valve
supply pipe.
- the high pressure pump.
DIESEL INJECTION
140880
13B-88
a - Remove the high pressure pump pulley
a
Note:
If the high pressure pump is replaced, retain the
high pressure pump pulley and refit it to the new
high pressure pump.
a Place the high pressure pump in a vice with jaws,
securing it at the lower mounting on the high pres-
sure pump pulley side.
a Immobilise the high pressure pump pulley using a 32
mm offset spanner.
a Remove the nut from the high-pressure pump pul-
ley.
13B
111743