Renault Laguna III Manual page 1756

Left-hand suspended engine mounting: Removal - Refitting
M9R, and 742 or 744 or 746 or 748 or 754 or 800 or 802 or 806 or 808 or 816
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the gearbox support on the side member,
- the bolts (7) securing the gearbox support.
a Torque tighten the gearbox support bolts on the
side member (105 N.m) (7) .
a Refit:
- the gearbox support ,
- the bolts (8) securing the gearbox support.
a Torque tighten the gearbox support bolts on the
gearbox (105 N.m) (8) .
a Refit:
- the rubber pad,
- the rubber pad bolts (9) .
a Tighten the rubber pad bolts (9) .
a Refit the rubber pad nut (10) .
a Tighten the rubber pad nut (10) .
II - FINAL OPERATION
a Refit the lower engine tie-bar (see 19D, Engine
mounting, Lower engine tie-bar: Removal - Refit-
ting, page 19D-85) .
a Remove the (Mot. 1453) and (Mot. 1453-01).
ENGINE MOUNTING
124217
19D-10
a Fit the wiring harness channel.
a Refit:
- the diesel injection computer (see 13B, Diesel in-
jection, Diesel injection computer: Removal -
Refitting, page 13B-36) ,
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the battery (see Battery: Removal - Refitting)
(80A, Battery),
- the engine undertray,
- the engine undertray bolts.
19D