Renault Laguna III Manual page 1752

Left-hand suspended engine mounting: Removal - Refitting
M4R
a Refit the suspended engine mounting rubber pad on
the gearbox.
a Slightly raise the engine until the suspended engine
mounting rubber pad on the gearbox comes into
contact with the suspended engine mounting rubber
pad support on the gearbox.
a Tighten to torque:
- the central nut of the suspended engine mount-
ing shaft on the gearbox (62 N.m),
- the nuts of the suspended engine mounting
rubber pad on the gearbox (105 N.m),
II - FINAL OPERATION.
a Refit:
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the battery (see Battery: Removal - Refitting)
(80A, Battery).
a Remove the retaining shoe of the tool (Mot. 1672).
a Unlock the retaining bar of the tool (Mot. 1672).
a Remove:
- the retaining bar of the tool (Mot. 1672),
- the retaining bars of the tool (Mot. 1720).
- the four pins of the tool (Mot. 1852).
a Refit:
- the radiator mounting cross member bolts,
- the tie-rod rear bolts.
a Torque tighten the tie-rod rear bolts (105 N.m).
a Refit:
- the engine undertray,
- the engine cover.
ENGINE MOUNTING
19D-6
19D