Renault Laguna III Manual page 1374

Crankshaft position sensor: Removal - Refitting
F4R
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front engine cover.
II - REMOVAL OPERATION FOR PART
CONCERNED
a Disconnect the crankshaft position sensor connector
(1) .
a Remove:
- the crankshaft position sensor bolt (2) ,
- the crankshaft position sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the crankshaft position sensor,
- the crankshaft position sensor bolt.
a Tighten the crankshaft position sensor bolt.
a Connect the crankshaft position sensor connector.
II - FINAL OPERATION.
a Refit the engine cover.
PETROL INJECTION
102485
17B-36
17B