Renault Laguna III Manual page 1425

Cooling radiator: Removal - Refitting
K4M or M4R
M4R
a Unclip:
- the fan assembly wiring (3) ,
- the fan assembly resistor wiring.
a Remove:
- the expansion bottle cooling hose clip (4) on the
cooling radiator using the tool (Mot. 1448),
- the upper cooling hose clip (5) on the cooling radi-
ator using the tool (Mot. 1448).
a Disconnect:
- the expansion bottle cooling hose on the cooling
radiator,
- the upper cooling hose from the cooling radiator.
COOLING
a Remove the air scoops (6) from the cooling radiator.
123468
a Disconnect the pressure sensor connector (7) .
a Remove the bolt (8) from the « compressor -
condenser » connecting pipe.
19A-37
19A
123470
123479