Renault Laguna III Manual page 1334

V4Y
REFITTING
I - REFITTING PREPARATION OPERATION
a Apply a bead of FLUOSTAR grease (see Vehicle:
Parts and consumables for the repair) (04B, Con-
sumables - Products) with a diameter of 2 mm to the
ignition coils on the inner edge (5) of the high tension
cap.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the ignition coils.
a Torque tighten the ignition coil bolts on the front
and back rows (7 N.m).
III - FINAL OPERATION
1 - Coils located on the back row
a Connect the ignition coil connectors.
a Refit:
- the intake distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) .
IGNITION
Coils: Removal - Refitting
2 - Coils located on the front row
a Connect the ignition coil connectors.
a Refit:
- the engine cover support,
- the engine cover.
17A-9
17A
106443