Renault Laguna III Manual page 1458

Coolant pump: Removal - Refitting
M4R
II - REMOVAL OPERATION FOR PART
CONCERNED
a Remove:
- the water pump bolts (1) ,
- the water pump,
- the coolant pump seal,
COOLING
REFITTING
I - REFITTING PREPARATIONS OPERATION
a Always replace the coolant pump seal.
a Clean and degrease the water pump joint faces us-
ing SURFACE CLEANER (see Vehicle: Parts and
consumables for the repair) (MR 415, 04B, Con-
sumables - Products).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
115086
- the water pump fitted with a new seal,
- the coolant pump bolts.
a Torque tighten the coolant pump bolts (25 Nm).
III - FINAL OPERATION.
a Refit:
- the alternator (see 16A, Starting - Charging, Al-
- the accessories belt (see 11A, Top and front of
- the front right-hand wheel arch liner (see Front
- the front right-hand wheel (see Wheel: Removal -
115085
- the engine undertray,
- the engine undertray bolts,
a Tighten the engine undertray bolts.
a Perform the following operations:
- fill the cooling system (see 19A, Cooling, Cooling
- bleed the cooling system (see 19A, Cooling, Cool-
19A-70
WARNING
Do not scratch the aluminium joint faces: any
surface damage to the joint faces may cause
leaks.
ternator: Removal - Refitting, page 16A-1) ,
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
wheel arch liner: Removal - Refitting) (MR 416,
55A, Exterior protection),
Refitting) (MR 415, 35A, Wheels and tyres),
system: Draining - Refilling, page 19A-16) ,
ing system: Draining - Refilling, page 19A-16) .
19A