Renault Laguna III Manual page 1766

Left-hand suspended engine mounting: Removal - Refitting
F4R, and PK4
a Remove:
- the left-hand suspended engine mounting bolts
(19) on the gearbox,
- the left-hand suspended engine mounting support
on the gearbox.
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the exhaust bracket gasket,
- the rear tie rod bolts,
- the radiator mounting cross member bolts.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the left-hand suspended engine mounting sup-
port on the gearbox.
a Torque tighten the left-hand suspended engine
mounting support bolts on the gearbox (105
N.m).
a Refit the left-hand suspended engine mounting rub-
ber pad on the body.
a Torque tighten the upper bolts of the left-hand
suspended engine mounting rubber pad on the
body (105 N.m).
a Tighten the lower bolts of the left-hand suspended
engine mounting rubber pad on the body.
ENGINE MOUNTING
124139
19D-20
a Slightly raise the engine until the suspended engine
mounting rubber pad on the gearbox comes into
contact with the suspended engine mounting rubber
pad support on the gearbox.
a Torque tighten the left-hand suspended engine
mounting rubber pad central nut (62 N.m).
III - FINAL OPERATION
a Remove the retaining shoe of the tool (Mot. 1672).
a Unlock the retaining bar of the tool (Mot. 1672).
a Remove:
- the retaining bar of the tool (Mot. 1672),
- the retaining bars of the tool (Mot. 1720).
- the four pins of the tool (Mot. 1852).
a Refit:
- new radiator mounting cross member bolts,
- new rear tie rod bolts.
a Torque tighten the tie rod rear bolts (105 N.m).
a Refit a new exhaust flange seal.
a Fit the exhaust pipe.
a Refit:
- the exhaust flange nuts,
- the lower engine tie-bar.
a Tighten to torque:
- the lower engine tie-bar bolt on the subframe
(115 N.m),
- the lower engine tie-bar bolt on the lower en-
gine tie-bar support (190 N.m).
a Refit the engine undertray.
a Fit:
- the engine wiring channel,
- the injection computer support.
a Refit the injection computer mounting nut.
a Fit the max fuse box.
a Refit:
- the max fuse box bolt,
- the max fuse box clip,
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
19D