Renault Laguna III Manual page 1880

Manual gearbox: Removal - Refitting
K9K, and TL4
Special tooling required
Mot. 1453 Engine anchorage support
with multiple adjustments and
retaining straps.
Mot. 1453-01 Additional handle nut for
engine lifting support tool
Mot. 1453.
Bvi. 1718 Component suppor t plate for
removal - refitting of gear-
boxes.
Equipment required
safety strap(s)
component jack
Tightening torquesm
reverse gear switch
manual gearbox studs
nuts on the manual
gearbox
lower bolts on the man-
ual gearbox
bolts of the manual
gearbox
bolts for the suspended
engine mounting on the
gearbox
upper engine tie-bar bolt
on the body
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a lift (see Vehicle: Towing
and lifting) (02A, Lifting equipment).
a Remove:
- the engine cover,
- the battery (see Battery: Removal - Refitting)
(80A, Battery)
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
MANUAL GEARBOX
23 N.m
7 N.m
44 N.m
44 N.m
44 N.m
62 N.m
115 Nm
21A-21
- the air filter box (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture).
a Loosen the clip (1) on the intercooler outlet air pipe.
a Disconnect the intercooler outlet air pipe from the
damper valve.
a Move the intercooler outlet air pipe to one side.
a Disconnect the connector (2) from the reverse gear
switch.
21A
123532
123528