Renault Laguna III Manual page 1607

Catalytic converter: Removal - Refitting
K9K, and 780
Tightening torquesm
lower engine tie-bar
bolts
Note:
Before carrying out work on the catalytic converter
(see 19B, Exhaust, Exhaust: Precautions for the
repair, page 19B-18) .
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 415, 02A, Lifting equip-
ment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray.
a Remove:
- the bolts (1) from the lower engine tie-bar,
- the lower engine tie-bar.
EXHAUST
II - OPERATION FOR REMOVAL OF PART
CONCERNED
190 N.m
a Remove the intermediate pipe bolts (2) on the cata-
lytic converter.
a Remove the intermediate pipe.
123787
19B-41
19B
123779