Renault Laguna III Manual page 1939

Table of Contents

Advertisement

Automatic gearbox: Removal - Refitting
V9X, and AJ0
Special tooling required
Mot. 1448
Remote operation pliers for
hose clips.
Mot. 1390
Support for removal - refitting
of engine - gearbox assembly
Equipment required
refrigerant charging station
workshop hoist
Diagnostic tool
Tightening torquesm
gearbox bell housing
bolts and nuts
converter nuts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
AUTOMATIC GEARBOX
44 N.m
44 N.m
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the headlights (see Headlight: Removal - Refit-
ting) (80B, Headlights),
- the front left-hand driveshaft (see 29A, Drive-
shafts, Front left-hand driveshaft: Removal -
Refitting, page 29A-1) ,
- the front right-hand driveshaft (see 29A, Drive-
shafts, Front right-hand driveshaft: Removal -
Refitting, page 29A-7) ,
- the air filter unit (see Air filter unit: Removal - Re-
fitting) (12A, Fuel mixture),
- the audible warning (see Audible warning: Re-
moval - Refitting) (82B, Horn),
- the bonnet catch (see Bonnet lock: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms),
- the front end panel (see Front end panel: Remov-
al - Refitting) (42A, Upper front structure),
- the engine cooling fan assembly (see Engine
cooling fan assembly: Removal - Refitting)
(19A, Cooling).
WARNING
Consult the device's operating manual to avoid
incorrect use.
23A-21
23A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents