Renault Laguna III Manual page 1133

Injector rail: Removal - Refitting
K9K, and 780
- a new high pressure pipe between the pump and
the rail (see 13B, Diesel injection, High pressure
pipe between pump and rail: Removal - Refit-
ting, page 13B-140) .
a Tighten the injector rail nuts.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Refit the engine cover.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select « injection computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
computer selected,
- select « injector rail pressure sensor » in the « List
of components controlled by this computer » sec-
tion,
- carry out the operations described in the « After re-
pair procedure » section.
DIESEL INJECTION
13B-194
13B