Renault Laguna III Manual page 1221

Exhaust gas recirculation solenoid valve: Removal - Refitting
K9K, and 780
- the exhaust gas recirculation solenoid valve,
- the bolts to the exhaust gas recirculation solenoid
valve.
a Tighten the exhaust gas recirculation solenoid valve
bolts.
a Connect the exhaust gas recirculation solenoid
valve connector.
III - FINAL OPERATION.
a Refit the oil vapour rebreathing pipe.
a Connect the oil vapour rebreathing pipe:
- to the oil vapour rebreathing valve,
- on the air filter box outlet air pipe.
a Refit the engine cover.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select the « injection computer » ,
- go to repair mode,
- display the « before/after repair procedure » for the
selected computer,
- select the « EGR valve » in the « List of compo-
nents stored by the computer section » ,
- carry out the operations described in the « After re-
pair procedure » section.
ANTIPOLLUTION
14A-20
14A