Renault Laguna III Manual page 1751

Left-hand suspended engine mounting: Removal - Refitting
M4R
a Move the electrical wiring (13) to one side.
a Remove:
- the rubber pad mounting bolts (14) from the sus-
pended engine mounting on the gearbox,
- the rubber pad mounting from the suspended en-
gine mounting on the gearbox (15) .
ENGINE MOUNTING
123456
19D-5
a Unclip the clutch control pipe from the suspended
engine mounting rubber pad shaft on the gearbox
(16) .
a Move the clutch control pipe away from the sus-
pended engine mounting rubber pad shaft on the
gearbox.
a Remove:
- the bolts (17) from the suspended engine mounting
rubber pad shaft on the gearbox,
- the suspended engine mounting rubber pad shaft
from the gearbox (18) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the suspended engine mounting rubber pad
shaft on the gearbox.
a Torque tighten the bolts from the suspended en-
gine mounting rubber pad shaft on the gearbox
(62 Nm).
a Fit the clutch control pipe on the suspended engine
mounting rubber pad shaft on the gearbox.
a Clip the clutch control pipe on the suspended engine
mounting rubber pad shaft on the gearbox.
a Refit the rubber pad mounting from the suspended
engine mounting on the gearbox.
a Fit the electrical wiring.
19D
123455