Renault Laguna III Manual page 1422

Cooling radiator: Removal - Refitting
F4R
a Clip:
- the engine cooling fan assembly resistor wiring to
the engine cooling fan assembly,
- the engine cooling fan assembly wiring to the en-
gine cooling fan assembly,
a Connect:
- the engine cooling fan assembly resistor connec-
tor,
- the engine cooling fan assembly connector.
a Clip on the pressure sensor wiring harness.
a Connect the pressure sensor connector.
a Connect the expansion bottle degassing hose to the
cooling radiator.
a Fit the expansion bottle degassing hose clip on the
cooling radiator side using the tool (Mot. 1448).
a Refit:
- the front end panel (see Front end panel: Remov-
al - Refitting) (42A, Upper front structure),
- the headlights (see Headlight: Removal - Refit-
ting) (80B, Headlights),
- the cooling radiator upper cover,
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the wheel arch liners (see Front wheel arch liner:
Removal - Refitting) (55A, Exterior protection),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the engine undertray.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Perform the following operations:
- fill the refrigerant circuit using a refrigerant charg-
ing station (see Refrigerant circuit: Draining -
Filling) (62A, Air conditioning).
- fill the cooling system (see 19A, Cooling, Cooling
system: Draining - Refilling, page 19A-16) ,
- bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) .
a Refit the engine cover.
COOLING
19A-34
19A