Renault Laguna III Manual page 1682

Particle filter temperature sensors: Removal - Refitting
V9X
a Loosen the nut of the particle filter temperature sen-
sor using the tool (Mot. 1807).
a Remove the particle filter temperature sensor (3) .
REFITTING
REFITTING OPERATION FOR PART CONCERNED
a Coat the threaded union of the particle filter temper-
ature sensor with COPPER ALUMINIUM LUBRI-
CANT (see Vehicle: Parts and consumables for
the repair) (04B, Consumables - Products).
a Torque tighten the particle filter temperature sen-
sor (30 N.m) using the tool (Mot. 1807).
a Position the particle filter temperature sensor wiring.
a Connect the particle filter temperature sensor con-
nector.
a Clip:
- the particle filter temperature sensor wiring,
- the particle filter downstream temperature sensor
connector on the exhaust heat shield.
a Fit the exhaust heat shield.
a Refit the clip of the exhaust heat shield.
EXHAUST
133905
19B-116
19B