Renault Laguna III Manual page 1266

Exhaust gas recirculation rigid pipe: Removal - Refitting
M9R, and 754 or 800 or 802 or 805 or 806 or 808 or 809 or 816 or 845 or 849
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the battery (see Battery: Removal - Refitting)
(80A, Battery),
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) .
a Unclip:
- the turbocharger control solenoid valve pipe on the
air filter unit air outlet pipe,
- the air flowmeter wiring on the air filter unit air outlet
pipe.
a Disconnect:
- the oil vapour rebreathing pipe on the oil decanter,
- the vacuum pipe to the vacuum pump.
a Loosen the clip of the air filter unit air outlet pipe on
the turbocharger side.
a Remove:
- the air filter unit air outlet pipe,
- the engine undertray bolts,
- the engine undertray.
a Drain the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-16) .
a Remove the water chamber (see 19A, Cooling, Wa-
ter chamber: Removal - Refitting, page 19A-100) .
ANTIPOLLUTION
14A-65
a Remove:
- the bolts (1) from the exhaust gas recirculation rigid
pipe heat shield on the inlet side,
- the exhaust gas recirculation rigid pipe heat shield
on the inlet side.
14A
123961