Renault Laguna III Manual page 1004

High pressure pump: Removal - Refitting
M9R, and 742 or 744 or 746
a
Note:
Check that the intercooler air inlet pipe seal is fit-
ted in the right direction on the turbocharger side.
a Fit a new seal to the intercooler air inlet pipe on the
turbocharger side.
II - REFITTING OPERATION FOR PART
CONCERNED
a
WARNING
Do not remove the blanking plugs from each
component until the last moment.
Also, do not remove the components from their
packaging until they are to be fitted to the vehi-
cle.
DIESEL INJECTION
115069
13B-65
a Refit the new O-ring (9) .
a Lubricate the new high-pressure pump seal with en-
gine oil.
a
Note:
Do not apply pressure to the high-pressure pump
gear teeth.
Check that the high pressure pump is in contact
with the cylinder head before positioning the high
pressure pump bolts.
a Refit:
- the high pressure pump,
- the high pressure pump bolts.
13B
123578