Renault Laguna III Manual page 1386

Injector rail - Injectors: Removal - Refitting
K4M
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the injector seals,
- the clip of each injector.
a Refit:
- new seals on the injectors,
- the injectors on the injector rail,
- new clips on each injector.
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit the « injector rail-injector » assembly.
a Connect the connector on each injector.
a Clip the wiring on the injector rail.
a Torque tighten in order the injector rail bolts (10
N.m).
III - FINAL OPERATION.
a Remove the blanking plugs.
a Connect the fuel supply pipe union on the injector
rail.
a Refit:
- the intake distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) ,
PETROL INJECTION
128399
17B-48
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
17B