Renault Laguna III Manual page 1522

Engine cooling fan assembly: Removal - Refitting
V9X
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Fit the engine cooling fan assembly:
a Clip the engine cooling fan assembly to the cooling
radiator.
a Clip on the fuel drain pipe.
a Fit the engine cooling fan assembly wiring.
a Clip the engine cooling fan assembly wiring.
a Connect the engine cooling fan assembly connec-
tors.
II - FINAL OPERATION
a Position the wiring on the engine cooling fan assem-
bly.
a Clip the wiring onto the engine cooling fan assembly.
a Refit:
- the front end panel (see Front end panel: Remov-
al - Refitting) (42A, Upper front structure),
- the bonnet catch (see Bonnet lock: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms),
- the audible warning (see Audible warning: Re-
moval - Refitting) (82B, Horn),
- the headlights (see Headlight: Removal - Refit-
ting) (80B, Headlights),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the engine undertray,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Adjust the headlight beams (see Headlight: Adjust-
ment) (80B, Headlights).
COOLING
19A-134
19A