Renault Laguna III Manual page 1375

Crankshaft position sensor: Removal - Refitting
K4M
Tightening torquesm
crankshaft position sen-
sor bolt
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the crankshaft position sensor connector
(1) .
PETROL INJECTION
8 N.m
128373
17B-37
a Remove:
- the crankshaft position sensor bolt (2) ,
- the crankshaft position sensor.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
a Refit the crankshaft position sensor.
a Torque tighten the crankshaft position sensor
bolt (8 N.m).
a Connect the crankshaft position sensor connector.
17B
128372