Renault Laguna III Manual page 1238

Exhaust gas cooler: Removal - Refitting
M9R, and 754 or 800 or 802 or 805 or 806 or 808 or 809 or 816 or 845 or 849
REFITTING
I - REFITTING PREPARATION OPERATION
a Use SURFACE CLEANER (see Vehicle: Parts
and consumables for the repair) (04B, Consum-
ables - Products) to clean and degrease the exhaust
gas cooler joint faces if it is being reused.
a Always replace the exhaust gas recirculation rigid
pipe.
II - REFITTING OPERATION FOR PART
CONCERNED
a Connect the exhaust gas cooler top hose.
a Refit:
- the exhaust gas cooler,
- the exhaust gas cooler bolts.
a Tighten the exhaust gas cooler bolts in order.
a Connect:
- the exhaust gas cooler bottom cooling hose,
- the exhaust gas cooler vacuum pipe.
a Refit the clips on the exhaust gas cooler hoses using
the tool (Mot. 1448).
III - FINAL OPERATION
a Refit:
- the starter (see 16A, Starting - Charging, Starter:
Removal - Refitting, page 16A-31) ,
ANTIPOLLUTION
123946
14A-37
- the new exhaust gas recirculation rigid pipe (see
14A, Antipollution, Exhaust gas recirculation
rigid pipe: Removal - Refitting, page 14A-62) ,
- the water chamber (see 1 9 A, Cooling, Water
chamber: Removal - Refitting, page 19A-100) ,
- the EGR solenoid valve (see 14A, Antipollution,
Exhaust gas recirculation solenoid valve: Re-
moval - Refitting, page 14A-11) ,
- the damper valve (see 12A, Fuel mixture, Damp-
er valve: Removal - Refitting, page 12A-39) ,
- the air filter unit (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
- the battery (see Battery: Removal - Refitting)
(80A, Battery).
a Fill and bleed the cooling system (see 19A, Cool-
ing, Cooling system: Draining - Refilling, page
19A-16) .
a Refit:
- the engine undertray,
- the engine undertray bolts.
14A