Renault Laguna III Manual page 1760

Left-hand suspended engine mounting: Removal - Refitting
K9K
a Refit:
- the engine undertray,
- the engine undertray bolts.
a Raise the engine using the tool (Mot. 1453) fitted
with the tool (Mot. 1453-01).
a Fit the left-hand suspended engine mounting rubber
pad.
a Position the left-hand suspended engine mounting
rubber pad in line with the marks made when it was
removed.
a Refit the left-hand suspended engine mounting rub-
ber pad nuts.
a Tighten the left-hand suspended engine mounting
rubber pad nuts.
a Tighten the left-hand suspended engine mounting
shaft of the rubber pad using the tool (Mot. 1453) fit-
ted with the tool (Mot. 1453-01).
a Refit the left-hand suspended engine mounting shaft
nut.
a Tighten the left-hand suspended engine mounting
shaft nut.
a Remove the (Mot. 1453) then the (Mot. 1453-01).
a Refit:
- the upper engine tie-bar,
- the upper engine tie-bar bolt on the body,
- the upper engine tie-bar bolt on the cylinder head.
a Torque tighten the upper engine tie-bar bolt on
the body (115 Nm).
a Tighten the upper engine tie-bar bolt on the cylinder
head.
II - FINAL OPERATION.
a Refit:
- the air filter box (see 12A, Fuel mixture, Air filter
unit: Removal - Refitting, page 12A-13) ,
- the battery tray (see Battery tray: Removal - Re-
fitting) (MR 415, 80A, Battery),
- the battery (see Battery: Removal - Refitting)
(MR 415, 80A, Battery).
ENGINE MOUNTING
19D-14
19D