Renault Laguna III Manual page 1384

Injector rail - Injectors: Removal - Refitting
K4M
Tightening torquesm
injector rail bolts
IMPORTANT
Wear leaktight gloves (nitrile type) for this opera-
tion.
IMPORTANT
During this operation, be sure to:
- refrain from smoking or bringing red hot objects
close to the working area,
- be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove:
- the engine cover,
- the intake distributor (see 12A, Fuel mixture, Inlet
distributor: Removal - Refitting, page 12A-75) .
PETROL INJECTION
10 N.m
17B-46
a
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
a Disconnect the fuel supply pipe union (1) from the in-
jector rail.
a Insert the blanking plugs.
17B
128400