Renault Laguna III Manual page 1843

Lower engine tie-bar: Removal - Refitting
K9K, and 782
Tightening torquesm
lower engine tie-bar
mounting bolts
lower engine tie-bar
bolts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
- the engine undertray.
a Drain the manual gearbox (see Manual gearbox
oils: Draining - Filling) (21A, Manual gearbox).
a Remove:
- the front right-hand wheel driveshaft (see Front
right-hand driveshaft: Removal - Refitting)
(29A, Driveshafts),
- the right-hand differential output seal (see Differ-
ential output seal: Removal - Refitting) (21A,
Manual gearbox).
ENGINE MOUNTING
62 N.m
190 N.m
19D-97
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the bolts (1) from the lower engine tie-bar,
- the lower engine tie-bar,
- the lower engine tie-bar support bolts (2) ,
- the lower engine tie-bar support.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the lower engine tie-bar support.
a Torque tighten the lower engine tie-bar mounting
bolts (62 N.m).
a Refit the lower engine tie-bar.
a Torque tighten the lower engine tie-bar bolts (190
N.m).
II - FINAL OPERATION
a Refit:
- a new right-hand differential output seal (see Dif-
ferential output seal: Removal - Refitting) (21A,
Manual gearbox),
- the front right-hand wheel driveshaft (see Front
right-hand driveshaft: Removal - Refitting)
(29A, Driveshafts).
19D
123787