Renault Laguna III Manual page 1280

Alternator: Removal - Refitting
M4R
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the alternator,
- the alternator bolts.
a Torque tighten the alternator bolts (25 Nm).
a Fit the alternator wiring.
a Refit the alternator nut.
a Torque tighten the alternator nut (21 N.m).
a Connect the alternator connector.
III - FINAL OPERATION.
a Clip on the expansion bottle by:
- inserting the expansion bottle into the holes in the
body,
- pushing the expansion bottle towards the engine.
a Refit the expansion bottle bolt.
a Tighten the expansion bottle bolt.
a Remove the blanking plugs from the fuel supply
pipe.
a Connect the fuel supply pipe to the injector rail.
a Clip the fuel supply pipe to the expansion bottle and
to the engine mounting cover.
a Refit:
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-13) ,
- the front right-hand wheel arch liner (see Front
wheel arch liner: Removal - Refitting) (MR 415,
55A, Exterior protection),
- the front right-hand wheel (see Wheel: Removal -
Refitting) (MR 415, 35A, Wheels and tyres),
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
STARTING - CHARGING
16A-3
16A