Renault Laguna III Manual page 1556

Coolant temperature sensor: Removal - Refitting
M4R
a Remove:
- the coolant temperature sensor using a " Crowfoot
" type adapter (2) ,
- the coolant temperature sensor seal.
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace the coolant temperature sensor seal.
COOLING
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit the coolant temperature sensor fitted with a
new seal.
a Torque tighten the coolant temperature sensor
(25 Nm).
a Connect the coolant temperature sensor connector.
III - FINAL OPERATION.
a Perform the following operations:
- top up of the coolant level,
- bleed the cooling system (see 19A, Cooling, Cool-
a Refit the engine cover.
123464
123462
19A-168
ing system: Draining - Refilling, page 19A-16) .
19A