Renault Laguna III Manual page 1589

Catalytic pre-converter: Removal - Refitting
M9R, and 802 or 805 or 806 or 808 or 809 or 816
M9R, and 802 or 806 or 808 or 816
a Remove the front right-hand driveshaft seal (see
Differential output seal: Removal - Refitting)
(21A, Manual gearbox).
a Remove:
- the connecting hose nuts (4) ,
- the catalytic pre-converter studs using a roller-
type stud removal tool,
- the connecting hose seal,
- the engine tie-bar (see 19D, Engine mounting,
Lower engine tie-bar: Removal - Refitting, page
19D-85) .
EXHAUST
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove:
- the catalytic pre-converter strut bolt (4) ,
- the strut nuts (5) on the catalytic pre-converter,
- the strut nuts (6) on the cylinder block,
124146
- the catalytic pre-converter strut.
a Remove:
- the bolts (7) from the catalytic pre-converter half-
19B-23
clips,
19B
124532
113270